Kia Niro: Hybrid Control System / High Voltage Battery Control System
Kia Niro 2017 (DE HEV) Service Manual / Hybrid Control System / High Voltage Battery Control System
- Components and components location
- Description and operation
- Schematic diagrams
- Troubleshooting
- BMS ECU Schematic diagrams
- BMS ECU Repair procedures
- Safety Plug Specifications
- Safety Plug Description and operation
- Safety Plug Schematic diagrams
- Safety Plug Repair procedures
- Main Fuse Specifications
- Main Fuse Description and operation
- Main Fuse Schematic diagrams
- Main Fuse Repair procedures
- Main Relay (+) / (-) Specifications
- Main Relay (+) / (-) Description and operation
- Main Relay (+) / (-) Schematic diagrams
- Main Relay (+) / (-) Repair procedures
- Pre-Charge Relay Specifications
- Pre-Charge Relay Description and operation
- Pre-Charge Relay Schematic diagrams
- Pre-Charge Relay Repair procedures
- Pre-Charge Resistor Specifications
- Pre-Charge Resistor Description and operation
- Pre-Charge Resistor Schematic diagrams
- Pre-Charge Resistor Repair procedures
- Battery Current Sensor Specifications
- Battery Current Sensor Description and operation
- Battery Current Sensor Schematic diagrams
- Battery Current Sensor Repair procedures
- Battery Temperature Sensor Specifications
- Battery Temperature Sensor Description and operation
- Battery Temperature Sensor Schematic diagrams
- Battery Temperature Sensor Repair procedures
Case Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” ...
Components and components location
Component Location
1. BMS ECU
2. Safety Plug
3. Main Relay (+)
4. Main Relay (-)
5. Pre-Charge Relay
6. Pre-Charge Resistor
7. Battery Cur ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Engine Oil and Filter Repair procedures
Inspection
Engine Oil Level
Be sure that the vehicle is on level ground.
1.
Warm up and stop the engine, and then wait for 5 minutes.
2.
Turn the engine off and wai ...
Kia Niro 2017 (DE HEV) Service Manual: Power Window Switch Repair procedures
Inspection
[Non-IMS Type]
Driver Power Window
Switch
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver front door trim.
(Refer to Body - "Front Door Trim")
3.
Disconnect ...
© 2016-2025 www.kniro.net
