Kia Niro: High Voltage Battery Control System / Safety Plug Description and operation
| Description |
Safety Plug is installed on the rear side of the high voltage battery and it can mechanically shut the high voltage circuit off when servicing the high voltage system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive Motor, Inverter, HSG, LDC, Power Cable, etc.).
It includes a fuse in order to prevent the high voltage system from overcurrent.
Safety Plug Specifications
Specification
Item
Specification
Rated Voltage (V)
450
Rated Current (A)
80
Fuse Rat ...
Safety Plug Schematic diagrams
Circuit Diagram
Harness Connector
[Interlock]
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: ETC (Electronic Throttle Control) System Troubleshooting
Fail-Safe Mode
Item
Fail-Safe
ETC Motor
Throttle valve stuck at 7°
TPS
TPS 1 fault
Replace it with TPS 2
TPS 2 fault
Replace it with TPS 1
TP ...
Kia Niro 2017 (DE HEV) Service Manual: Pre-Charge Relay Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” before doing any work related with the high voltage system.
Failure to follow the safety instr ...
