Kia Niro: High Voltage Battery Control System / Battery Temperature Sensor Specifications
| Specification |
[Air Inlet]
|
Temperature |
Resistance (kΩ) |
|
|
°C |
°F |
|
|
-50 |
-58 |
314.9 - 344.6 |
|
-40 |
-40 |
181.1 - 196.0 |
|
-30 |
-22 |
107.5 - 115.2 |
|
-20 |
-4 |
65.82 - 69.77 |
|
-10 |
14 |
41.43 - 43.52 |
|
0 |
32 |
26.74 - 27.83 |
|
10 |
50 |
17.67 - 18.25 |
|
20 |
68 |
11.94 - 12.24 |
|
30 |
86 |
8.214 - 8.411 |
|
40 |
104 |
5.738 - 5.918 |
|
50 |
122 |
4.082 - 4.239 |
|
60 |
140 |
2.954 - 3.087 |
|
70 |
158 |
2.172 - 2.284 |
|
80 |
176 |
1.621 - 1.715 |
|
90 |
194 |
1.227 - 1.305 |
|
100 |
212 |
0.941 - 1.006 |
|
110 |
230 |
0.731 - 0.785 |
[Cell]
|
Temperature |
Resistance (kΩ) |
|
|
°C |
°F |
|
|
-50 |
-58 |
351.1 - 385.0 |
|
-40 |
-40 |
196.6 - 213.1 |
|
-30 |
-22 |
114.4 - 122.7 |
|
-20 |
-4 |
68.94 - 73.15 |
|
-10 |
14 |
42.59 - 44.76 |
|
0 |
32 |
27.14 - 28.27 |
|
10 |
50 |
17.78 - 18.36 |
|
20 |
68 |
11.96 - 12.25 |
|
30 |
86 |
8.202 - 8.399 |
|
40 |
104 |
5.721 - 5.901 |
|
50 |
122 |
4.069 - 4.226 |
|
60 |
140 |
2.945 - 3.078 |
|
70 |
158 |
2.169 - 2.280 |
|
80 |
176 |
1.622 - 1.715 |
|
90 |
194 |
1.228 - 1.306 |
Battery Current Sensor Repair procedures
Removal
•
Be sure to read and follow the “General Safety Information and
Caution” ...
Battery Temperature Sensor Description and operation
Description
Installed inside the high voltage battery pack assembly, the battery temperature
sensor measures the temperature of the battery modules 5 and 9, and the air inlet.
It is i ...
Other information:
Kia Niro (DE HEV) Owners Manual: Tail lamp (inside) bulb replacement
1. Open the tailgate.
2. Remove the service cover.
3. Remove the socket from the assembly by turning the socket counterclockwise
until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb from the socket by pressing it in and rotating it counter-clockwise
until ...
Kia Niro 2017 (DE HEV) Service Manual: Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Switch "ON" the ignition.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Accelerator
Pos ...
