Kia Niro: Driveshaft and axle
- General safety information and caution
- High voltage shut-off procedures
- Specifications
- Special service tools
- Troubleshooting
- Driveshaft Assembly
- Front Driveshaft Components and components location
- Front Driveshaft Repair procedures
- TJ Joint Components and components location
- TJ Joint Repair procedures
- Dynamic Damper Components and components location
- Dynamic Damper Repair procedures
- BJ Boot Components and components location
- BJ Boot Repair procedures
- Front Axle Assembly / Front Hub / Knuckle
- Rear Axle Assembly / Rear Hub - Carrier
Coolant Repair procedures
Refilling And Bleeding
Never remove the cap when the engine is hot. Serious scalding could be
caused by hot fluid ...
General safety information and caution
Safety Precaution
Precautions to take before servicing
high voltage system
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Seat Belt Buckle Switch (BS) Description and operation
Description
The SRSCM shall monitor the status of the driver and front passenger seat belt
buckle. The SRSCM provides one pin each for the driver and front passenger seat
belt buckle status input. The seat belt buckle circuit operates from internal boost
voltage supplied by the SR ...
Kia Niro 2017 (DE HEV) Service Manual: Brake/Clutch Fluid Repair procedures
Inspection
Check the brake fluid level in the brake fluid reservoir. The level should be
between “MIN” and “MAX” marks on the side of the reservoir.
Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification.
Check the brake system for any leakage if th ...