Kia Niro: Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier

Kia Niro 2017 (DE HEV) Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier

Repair procedures
Removal 1. Remove the wheel and tire. Tightening torque : 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Components and components location
Components 1. Disc 2. Dust cover 3. Rear hub 4. Rear Knuckle ...

Other information:

Kia Niro (DE HEV) Owners Manual: Front turn signal lamp bulb replacement
1. Open the hood. 2. Remove the dust cover (A) from the headlamp assembly then bulbsocket by turning the counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly. 3. Remove the bulb from the bulbsocket by pressing it in and rotating it counterclockwise ...

Kia Niro 2017 (DE HEV) Service Manual: Blower Motor Repair procedures
Inspection 1. Operate the heater controls at IGN2 to ensure that the motor is running. 1. Battery (+) 2. Input signal 3. ? 4. Ground 2. If the blower motor does ...

© 2016-2020 www.kniro.net