Kia Niro: Rear Axle Assembly / Rear Hub - Carrier / Components and components location
Kia Niro 2017 (DE HEV) Service Manual / Driveshaft and axle / Rear Axle Assembly / Rear Hub - Carrier / Components and components location
| Components |
|
1. Disc 2. Dust cover |
3. Rear hub 4. Rear Knuckle |
Repair procedures
Removal
1.
Remove the tire (A).
Tightening torque :
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Coolant Repair procedures
Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious scalding
could be caused by hot fluid under high pressure escaping from the radiator.
...
Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Description and operation
Description
MAFS uses a sensing element made of a hot-film to measure the mass of intake
air entering the engine and to send the signal to the ECM.
A large amount of intake air represents acceleration or high load conditions
while a small amount of intake air represents decelerati ...
© 2016-2020 www.kniro.net