Kia Niro: Sunroof / Sunroof Sunshade Repair procedures

Replacement
1.

Remove the sunroof assembly.

(Refer to Sunroof - "Sunroof Assembly")

2.

Remove the drip rail assembly (A) after loosening the mounting screws.

3.

Separate the rear drip (A) after loosening the mounting screws.

4.

Remove the stopper (A) by pushing it in the direction of the arrow.

5.

Remove the sunroof sunshade (A) by pushing it backward.

6.

Install in the reverse order of removal.

  

Make sure to initialize the motor.

Sunroof Assembly Repair procedures
Replacement    • When removing with a flat-tip screwdriver or remover, wrap protective ta ...

Sunroof Guide Repair procedures
Replacement 1. Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2. Remove the sunroof sunshade. (Refer to Su ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Power Control Unit (HPCU) Schematic diagrams
Hybrid Power Control Unit (HPCU) connector and high voltage cable Hybrid Power Control Unit (HPCU) terminal And Input/Output signal ECM Terminal Function Connector [C133-S] (94Pin) : HPCU signal input and control Terminal ...

Kia Niro (DE HEV) Owners Manual: Front windshield wiper blade
Type A 1. Raise the wiper arm and turn the wiper blade assembly to expose the plastic locking clip. CAUTION Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield. 2. Compress the clip and slide the blade assembly downward. 3. Lift it off ...

© 2016-2024 www.kniro.net