Kia Niro: Heating, Ventilation and Air Conditioning / Blower

Duct Sensor Repair procedures
Inspection 1. Check that the voltage between No. 1 and 2 duct sensors change. 1. Sensor (+ 5V) 2. Sensor ground ...

Blower Unit Components and components location
Component Location 1. Blower unit assembly Components 1. Blower Intake Seal 2. Intake Duct Case [Upper] 3. Inta ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Dynamic Damper Repair procedures
Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ joint”) 3. Remove the remove the both s ...

Kia Niro (DE HEV) Owners Manual: Front turn signal lamp bulb replacement
1. Open the hood. 2. Remove the dust cover (A) from the headlamp assembly then bulbsocket by turning the counterclockwise until the tabs on the bulb-socket align with the slots on the headlamp assembly. 3. Remove the bulb from the bulbsocket by pressing it in and rotating it counterclockwise ...

© 2016-2025 www.kniro.net