Kia Niro: Engine Mechanical System / Cooling System
Kia Niro 2017 (DE HEV) Service Manual / Engine Mechanical System / Cooling System
- Components and components location
- Troubleshooting
- Coolant Repair procedures
- Cooling Fan Components and components location
- Cooling Fan Description and operation
- Cooling Fan Specifications
- Cooling Fan Schematic diagrams
- Cooling Fan Repair procedures
- Radiator Components and components location
- Radiator Repair procedures
- Reservoir Tank Repair procedures
- Water pump Repair procedures
- Thermostat Repair procedures
- Thermostat Troubleshooting
- Water Temperature Control Assembly Repair procedures
- Active Air Flap (AAF) Description and operation
- Active Air Flap (AAF) Schematic diagrams
- Active Air Flap (AAF) Repair procedures
- Active Air Flap (AAF) Troubleshooting
Special service tools
Special Service Tools
Tool Name / Number
Illustration
Description
Crankshaft front oil seal installer
A : 09231-G2100 (installer ...
Components and components location
Components
1. Reservoir tank
2. Reservoir hose & pipe
3. Radiator
4. Radiator upper hose
5. Radiator lower hose
6. Radiator upper mounting bracket ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: BJ Boot Components and components location
Components
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
11. Snap ring
12. TJ housing
13. T ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the tire.
2.
Disconnect the wheel speed sensor connector (A).
3.
Loosen the bearing bolts (A) and then remove the hub bearing assembly.
Tightening torque:
88.2 - 10 ...
© 2016-2020 www.kniro.net