Kia Niro: Cooling System / Cooling Fan Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Engine Mechanical System / Cooling System / Cooling Fan Components and components location

Components

1. Cooling fan
2. Cooling fan motor
3. Cooling fan shroud
4. Air dam
5. Cooling fan controller (PWM)

Coolant Repair procedures
Refilling And Bleeding    Never remove the radiator cap when the engine is hot. Serious scalding could be caused by ...

Cooling Fan Description and operation
Description Controls the cooling fan motor voltage depending on the duty output from the ECU (Freq.: 300Hz). [Signal from the ECU to the PWM (SI: 300Hz)] ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupants by retracting the seat belt ...

Kia Niro (DE HEV) Owners Manual: Head lamp low beam (RHD)
1. Turn the low beam on without driver aboard. 2. The cut-off line should be projected in the cut-off line shown in the picture. 3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming. 4. If head lamp leveling device is equipped, adjust the head la ...

© 2016-2019 www.kniro.net