Kia Niro: Climate control system / Automatic heating and air conditioning
1. Press the AUTO button. The modes, fan speeds, air intake and air-conditioning will be controlled automatically according to the temperature setting.
2. Turn the temperature control knob to the desired temperature.
✽ NOTICE
- To turn the automatic operation off, select any button or switch of the
following:
- Mode selection button
- Air conditioning button
- Front windshield defroster button (Press the button one more time to deselect the front windshield defroster function. The 'AUTO' sign will illuminate on the information display once again.)
- Fan speed control button The selected function will be controlled manually while other functions operate automatically. - For your convenience and to improve the effectiveness of the climate control, use the AUTO button and set the temperature to 22°C/71°F (23°C/73°F- Except Europe).
✽ NOTICE
Never place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.
- Mode selection
- Temperature control
- Air intake control
- Recirculated air position
- Outside (fresh) air position
- Fan speed control
- Air conditioning
- OFF mode
- Climate information screen selection
- Driver Only
Automatic climate control system
■ Type A
■ Type B
System Overview
1. Driver’s temperature control knob
2. AUTO (automatic control) button
3. Front windshield defroster button
4. Rear window defroster button
5. Air c ...
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
The air flow outlet port is converted as follows:
Face-Level (B, D, F)
Air flow is directe ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Headlamps Repair procedures
Inspection
1.
Check the battery voltage. (Low beam will be on when the battery voltage
is above 9 V.)
2.
Check the fuse and relay.
3.
Check the polarity of ballast. (The low beam will not light on in reverse
pola ...
Kia Niro (DE HEV) Owners Manual: Stop and tail lamp bulb replacement
1. Open the tailgate.
2. Open the service cover.
3. Loosen the light assembly retaining screws with a cross-tip screwdriver.
4. Remove the rear combination lamp assembly from the body of the vehicle.
5. Disconnect the rear combination lamp connector.
6. Remove the socket from the assembly ...