Kia Niro: Crash Pad / Crash Pad Side Cover Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Remove the crash pad side cover (A) by using a remover.

[LH]

[RH]

2.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Replace any damaged clips.

Crash Pad Side Cover Components and components location
Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Crash Pad Under Cover Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Immobilizer Control Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3. Disconnect the connector of the immobilizer unit and then remov ...

Kia Niro 2017 (DE HEV) Service Manual: Battery Current Sensor Specifications
Specification Battery Current Sensor Item Output Voltage (V) Max. Current (A) -300 (Charge) 0.5 0 2.5 +300 (Discharge) 4.5 Rated Current (A) ...

© 2016-2021 www.kniro.net