Kia Niro: Front / Rear Parking Assist System / Parking Assist Sensor Repair procedures

Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the front / rear bumper cover.

(Refer to Body - "Front Bumper Cover")

(Refer to Body - "Rear Bumper Cover")

3.

Disconnect the connector (A) from the ultrasonic sensor.

[Front]

[Rear]

4.

Pull out ths ultrasonic sensor (A) after opening the sensor holder (B).

[Front]

[Rear]

Installation
1.

Install the ultrasonic sensor after connecting the connector.

2.

Install the front/rear bumper cover.

3.

Connect the negative (-) battery terminal.

Parking Assist Sensor Components and components location
Component ...

Front Rear Parking Assist System Switch Components and components location
Component ...

Other information:

Kia Niro (DE HEV) Owners Manual: Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 12,000 km (7,500 miles) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire ...

Kia Niro 2017 (DE HEV) Service Manual: Power Relay Assembly (PRA) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

© 2016-2019 www.kniro.net