Kia Niro: Automatic heating and air conditioning / Temperature control

The temperature will increase to the maximum by turning the knob to the extreme right.

The temperature will decrease to the minimum by turning the knob to the extreme left.

When turning the knob, the temperature will increase or decrease by 0.5°C/1°F. When set to the lowest temperature setting, the air conditioning will operate continuously.

Adjusting the driver and passenger side temperature equally

Adjusting the driver and passenger side temperature individually

Temperature conversion (°C ↔ °F)

You can switch the temperature mode between Centigrade to Fahrenheit as follows;

While pressing the OFF button, depress the AUTO button for 3 seconds or more. The display will change from Centigrade to Fahrenheit, or from Fahrenheit to Centigrade.

Mode selection
The mode selection button controls the direction of the air flow through the ventilation system. The air flow outlet port is converted as follows: Face-Level (B, D, F) Air flow is directe ...

Air intake control
This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Removal    In case of bad quality or poor focus, be sure to check the camera lense surface condition and foreign materials. 1. Disconnect the negative (-) battery terminal. ...

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Damper Pulley Repair procedures
Removal and Installation 1. Remove the RH front wheel. (Refer to Suspension System - "Wheel") 2. Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") ...

© 2016-2021 www.kniro.net