1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the lamp housing notches and snap the lens into place.
CAUTION
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
✽ NOTICE
If the LED lamp does not operate, we recommend that you checked on authorized Kia dealer.
Kia Niro (DE HEV) Owners Manual: To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+), and hold it. Your vehicle set speed will increase
by 10 km/h (5 mph). Release the lever at the speed you want.
Move the lever up (to RES+), and release it immediately.The cruising speed
will increase by 1.0 km/h (1.0 mph) ...
Kia Niro 2017 (DE HEV) Service Manual: Rear Wiper Motor Repair procedures
Inspection
Rear Wiper Motor
1.
Remove the connector from the rear wiper motor.
2.
Connect positive (+) battery cables to terminal 4 and negative (-) battery
cables to terminal 3 respectively.
3.
Check that the motor ...