Kia Niro: Light bulbs / Room lamp bulb replacement
WARNING
Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the lamp housing notches and snap the lens into place.
CAUTION
Be careful not to dirty or damage the lens, lens tab, and plastic housings.
Vanity mirror lamp bulb replacement
WARNING
Prior to working on the Interior lamps, ensure that the “OFF” button is depressed
to avoid burning your fingers or receiving an electric shock.
1. Using a flat-blade screwdriver, gen ...
Tailgate room lamp bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs wi ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Inspection mode procedures
Procedure for entering engine
forced activation mode
If the engine needs to be run constantly while the vehicle is stopped to inspect
emission gas or perform maintenance on the vehicle, follow the below procedure to
enter forced engine activation mode.
1.
Place ...
Kia Niro (DE HEV) Owners Manual: Applying the parking brake
To engage the parking brake, first apply the foot brake and then depress the
parking brake pedal down as far as possible.
CAUTION
Driving with the parking brake applied will cause excessive brake pad
(or lining) and brake rotor wear.
Do not operate the parking brake while the vehicle i ...
