Kia Niro: Engine Mechanical System / Engine And Transaxle Assembly

Crankshaft Damper Pulley Repair procedures
Removal and Installation 1. Remove the RH front wheel. (Refer to Suspension System - "Wheel") 2. Remove the engine room under cover. ...

Engine Room Under Cover Repair procedures
Removal Engine room under cover. 1. Remove the engine room under cover (A). Tightening torque : 3.9 - 5.9 N·m (0.4 - 0.6 kgf·m, 2.9 - 4.3 lb· ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: DCT Control Module (TCM) Repair procedures
Inspection 1. TCM ground circuit test : Measure the resistance between TCM and chassis ground. (Inspect the terminal connected to the chassis ground with the back of harness connector as the inspection point of TCM side.) Specification : Below ...

Kia Niro 2017 (DE HEV) Service Manual: CVVT (Continuous Variable Valve Timing) System Repair procedures
Inspection Variable Force Solenoind (VFS) Refer to Engine Control / Fuel System - "Variable Force Solenoind (VFS)" CVVT Oil Control Valve (OCV) Refer to Engine Control / Fuel System - "CVVT Oil Control Valve (OCV)" Removal ...

© 2016-2023 www.kniro.net