Toyota Corolla: Do-it-yourself maintenance / Wheels

If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control.

Wheel selection

When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width and inset*. Replacement wheels are available at your Toyota dealer.

Toyota does not recommend using the following:

■When replacing wheels (vehicles with a tire pressure warning system)

The wheels of your vehicle are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire pressure warning valves and transmitters must be installed.

WARNING

■ When replacing wheels

■ When installing the wheel nuts

Do not use cracked or deformed wheels. Doing so could cause the tire to leak air during driving, possibly causing an accident.

NOTICE

■ Replacing tire pressure warning valves and transmitters (vehicles with a tire pressure warning system)

Aluminum wheel precautions

Inspection and adjustment procedure
A - Tire valve B - Tire pressure gauge 1 Remove the tire valve cap. 2 Press the tip of the tire pressure gauge onto the tire valve. 3 Read the pressure using the gauge gradations. 4 If the tire infla ...

Air conditioning filter
The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removing the air conditioning filter 1 Turn the engine switch off. 2 Open the glove box. Slide off the d ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Troubleshooting
Failure Diagnosis 1. In principle, ESP and TCS controls are prohibited in case of ABS failure. 2. When ESP or TCS fails, only the failed system control is prohibited. 3. However, when the solenoid valve relay shoul ...

Kia Niro 2017 (DE HEV) Service Manual: Dual Clutch Assembly Repair procedures
Removal 1. Remove the hybrid drive motor & dual clutch transmission assembly from the vehicle. (Refer to DCT System - "DCT") 2. Remove the hybrid drive motor assembly from the DCT assembly. (Refer to Hybrid Motor System ...

© 2016-2022 www.kniro.net