Kia Niro: Hybrid Motor System
Kia Niro 2017 (DE HEV) Service Manual / Hybrid Motor System
- General safety information and caution
- High voltage shut-off procedures
- Specifications
- Special service tools
- Hybrid Motor Assembly
- Description and operation
- Hybrid Drive Motor Assembly Components and components location
- Hybrid Drive Motor Assembly Specification
- Hybrid Drive Motor Assembly Repair procedures
- Hybrid Starter Generator(HSG) Components and components location
- Hybrid Starter Generator(HSG) Specification
- Hybrid Starter Generator(HSG) Repair procedures
- Hybrid Motor Control System
- Description and operation
- Motor Control Unit (MCU) Components and components location
- Motor Control Unit (MCU) Repair procedures
- Resolver Sensor Description and operation
- Resolver Sensor Schematic diagrams
- Resolver Sensor Repair procedures
- Motor Temperature Sensor Description and operation
- Motor Temperature Sensor Circuit diagram
- Motor Temperature Sensor Repair procedures
- Hybrid Motor Cooling System
- Description and operation
- Radiator Components and components location
- Radiator Repair procedures
- Electric Water Pump (EWP) Components and components location
- Electric Water Pump (EWP) Specifications
- Electric Water Pump (EWP) Repair procedures
- Reservoir Components and components location
- Reservoir Repair procedures
- Coolant Repair procedures
Clutch Engagement Fork and Engagement Bearing Repair procedures
Removal
1.
Remove the dual clutch assembly.
(Refer to Dual Clutch System - "Dual Clutch Assembly")
2.
Remove the clutch engagement b ...
General safety information and caution
Safety Precaution
Precautions to take before servicing
high voltage system
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Rear Combination Lamp Repair procedures
Removal
Rear Combination Lamp
(Outside)
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the rear combination lamp cover
(A).
3.
Remove the rear combination lamp ( ...
Kia Niro (DE HEV) Owners Manual: Disarmed stage
The system will be disarmed when:
Folding key
- The door unlock button is pressed.
- The engine is started. (within 3 seconds)
- The ignition switch is in the “ON” position for 30 seconds or more.
Smart key
- The door unlock button is pressed.
- The button of the front outside door is pre ...
© 2016-2018 www.kniro.net