Kia Niro: Lighting / Turn signals and lane change signals

Kia Niro (DE HEV) Owners Manual / Features of your vehicle / Lighting / Turn signals and lane change signals

The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which turn signal is operating.

They will self-cancel after a turn is completed. If the indicator continues to flash after a turn, manually return the lever to the OFF position.

To signal a lane change, move the turn signal lever slightly and hold it in position (B). The lever will return to the OFF position when released.

If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.

High beam operation
To turn on the high beam headlamp, push the lever away from you. The lever will return to its original position. The high beam indicator will light when the headlight high beams are switched on ...

One-touch lane change function
To activate an one-touch lane change function, move the turn signal lever slightly for less than 0.7 second and then release it. The lane change signals will blink 3 times. ✽ NOTICE If an indi ...

Other information:

Kia Niro (DE HEV) Owners Manual: Tailgate room lamp bulb replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb in the socket. 4. Align the lens cover tabs with the lamp housing notches and snap the lens into place. CAUTION Be careful not to dirty or dam ...

Kia Niro (DE HEV) Owners Manual: Warning type
The system will activate when: 1.The system is on 2.Vehicle speed is above 30 km/h (18.6 mph) 3.Other vehicles are detected in the rear side 1st stage If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outside rearview mirror. If the detected ...

© 2016-2020 www.kniro.net