Peugeot 2008: Indicators / Service indicator

The servicing information is expressed in terms of distance (kilometres or miles) and time (months or days).

The alert is given at whichever of these two terms is reached first.

The servicing information is displayed in the instrument panel. Depending on the version of the vehicle:

Peugeot 2008. Service indicator The value indicated is calculated according to the distance covered and the time elapsed since the last service.

The alert may also be triggered close to a due date.

Service spanner

Peugeot 2008. Service indicator On temporarily when the ignition is switched on.

Between 620 and 1,860 miles (1,000 and 3,000 km) remain before the next service is due.

Peugeot 2008. Service indicator Fixed, when the ignition is switched on.

The next service is due in less than 620 miles (1,000 km).

Have your vehicle serviced very soon.

Service spanner flashing

Peugeot 2008. Service indicator Flashing then fixed, when the ignition is switched on.

(With BlueHDi Diesel engines, combined with the Service warning lamp.)

The servicing interval has been exceeded.

Have your vehicle serviced as soon as possible.

Resetting the service indicator

The service indicator must be reset after each service.

If you have serviced your vehicle yourself:

Peugeot 2008. Service indicator

Peugeot 2008. Service indicator If you disconnect the battery following this operation, lock the vehicle and wait at least 5 minutes for the reset to be registered.

Reminder of the servicing information

Peugeot 2008. Service indicator You can view the servicing information by pressing the "Check" button  in the Driving/Vehicle touch screen menu.

Indicators
...

Engine oil level indicator
(Depending on version.) On versions fitted with an electric gauge, the engine oil level status is displayed on the instrument panel for a few seconds when the ignition is switched  on, after th ...

Other information:

Kia Niro (DE HEV) Owners Manual: Inner panel fuse replacement
1. Turn the ignition switch and all other switches off. 2. Open the fuse panel cover. If the switch is located in the “OFF”, caution will be displayed in the cluster. 3. Pull the suspected fuse straight out. Use the removal tool provided in the main fuse box in the engine compartment. ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Control Unit (HCU) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instr ...

© 2016-2021 www.kniro.net