Peugeot 2008: Practical information / Misfuel prevention (Diesel)

(Depending on country of sale.)

This mechanical device prevents filling the tank of a Diesel vehicle with petrol.

Located in the filler neck, the misfuel prevention device appears when the filler cap is removed.

Operation

Peugeot 2008. Misfuel prevention (Diesel)

When a petrol filler nozzle is inserted into the fuel filler neck of a Diesel vehicle, it comes into contact with the flap. The system remains closed and prevents filling.

Do not persist but introduce a Diesel type filler nozzle.

Peugeot 2008. Misfuel prevention (Diesel)It remains possible to use a fuel jerrycan to fill the tank.

Peugeot 2008. Misfuel prevention (Diesel) Travelling abroad

As Diesel fuel pump nozzles may be different in other countries, the presence of the misfuel prevention device may make refuelling impossible.

Before travelling abroad, it is advisable to check with a PEUGEOT dealer if the vehicle is suitable for the distribution equipment of the countries visited.

Refuelling
Fuel tank capacity: approximately 44 litres (Petrol) or 41 litres (Diesel). Reserve level: approximately 5 litres. Low fuel level When the low fuel level is reached, this warning lamp comes on on t ...

Charging system (Electric)
400  V electrical system The electrical traction system, which operates at a voltage of approximately 400 V, is identified by orange cables, and its components are marked with this symbol: An ...

Other information:

Kia Niro (DE HEV) Owners Manual: Suitability of each seating position for "universal" category belted Child Restraint Systems according to ECE regulations
Use Child Restraint System that have been officially approved and are appropriate for your children. When using the Child Restraint System, refer to the following table. U = Suitable for "universal" category Child Restraint Systems approved for use in this mass group U* = Suitabl ...

Kia Niro 2017 (DE HEV) Service Manual: Purge Control Solenoid Valve (PCSV) Description and operation
Description Installed on the intake manifold, the Purge Control Solenoid Valve (PCSV) controls the evaporative purge between the canister and the intake manifold. It is a solenoid valve and is open when the ECM grounds the valve control line. When the passage is open (PCSV ON), fu ...

© 2016-2021 www.kniro.net