Kia Niro: Dual Clutch Transmission Control System / Input Speed Sensor Description and operation

Description

The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM).

This data is necessary for all operations including feedback control, gear shift control and failure detection of other sensors.

Input Speed Sensor Specification
Specification Item Specification Type Hall effect sensor Operating condition -22 to 257 ° F (-30 to 1 ...

Input Speed Sensor Schematic diagrams
Schematic Diagrams ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Description and operation
Description MAFS uses a sensing element made of a hot-film to measure the mass of intake air entering the engine and to send the signal to the ECM. A large amount of intake air represents acceleration or high load conditions while a small amount of intake air represents decelerati ...

Kia Niro 2017 (DE HEV) Service Manual: Seat Belt Buckle Switch (BS) Description and operation
Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SR ...

© 2016-2020 www.kniro.net