Kia Niro: Hybrid Control System / Hybrid Control Unit (HCU) Repair procedures

Kia Niro 2017 (DE HEV) Service Manual / Hybrid Control System / Hybrid Control System / Hybrid Control Unit (HCU) Repair procedures

Removal
  

Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.

Be sure to shut off the high voltage before doing any work related with the high voltage system(Refer to "High Voltage Shut-off Procedure"). Failure to follow the safety instructions may result in serious electrical injuries.

1.

Refer to “HPCU”.

  

HCU is integrated into the HPCU and cannot be disassembled. Refer to "HPCU" for the removal or installation of HCU.

Installation
  

Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.

Be sure to shut off the high voltage before doing any work related with the high voltage system(Refer to "High Voltage Shut-off Procedure"). Failure to follow the safety instructions may result in serious electrical injuries.

1.

Refer to “HPCU”.

  

HCU is integrated into the HPCU and cannot be disassembled. Refer to "HPCU" for the removal or installation of HCU.

Hybrid Control Unit (HCU) Schematic diagrams
HCU Terminal And Input/Output Signal Terminal Function Connector [C133-S] Pin No. Description Connected to 1 ...

Brake Switch Specifications
Specification Item Brake pedal release Brake pedal depressed Switch 1 Max. 0.5V Battery Voltage ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Smart Key Unit Repair procedures
Removal    Put on gloves to prevent hand injuries.    • Use a plastic panel removal tool to remove interior trim piec ...

Kia Niro 2017 (DE HEV) Service Manual: Seat Heater Switch Repair procedures
Removal [Front Seat] 1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly") 3. Disconnect the front seat heater switch connector ( ...

© 2016-2020 www.kniro.net