Kia Niro: Hybrid Control System / Brake Switch Specifications

Specification
Item
Brake pedal release
Brake pedal depressed
Switch 1
Max. 0.5V
Battery Voltage
Switch 2
IG OFF
Max. 50mV
IG ON
Battery Voltage
Max. 0.5V

Items
Specification
Gap [mm (in)]
1.0 ~ 2.0 (0.039 ~ 0.079)

Hybrid Control Unit (HCU) Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” ...

Brake Switch Description and operation
Description Installed on the brake pedal and linked with the HCU and the stop lamp, the brake switch sensors the status of the brake pedal (Release/Depress) and informs the HCU. ...

Other information:

Kia Niro (DE HEV) Owners Manual: When the hybrid vehicle shuts off
When the high voltage battery or 12- volt battery discharges, or fuel tank is empty, the hybrid system may not operate. If the Hybrid system stops operating while the vehicle is moving, reduce the vehicle speed gradually. Pull your vehicle off the road in a safe area, and shift the transmissi ...

Kia Niro 2017 (DE HEV) Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a KDS/GDS. Specification: Refer to “Waveform” Removal 1. Switch "OFF" the ignition and disconnect the negative (-) batte ...

© 2016-2019 www.kniro.net