Peugeot 2008: Driving / Full Park Assist

Refer to the General recommendations on the use of driving and manoeuvring aids.

This system provides active parking assistance for vehicles fitted with the EAT8 automatic gearbox or a gear selector: it detects a free "parallel" or "bay" parking space and then operates the vehicle, parking it with no need for driver intervention. It also allows you to drive out of a "parallel parking" space automatically.

The system controls the steering, direction, acceleration and braking. The system measures the available parking spaces and calculates the distances to obstacles using 12 ultrasonic sensors built into the front and rear bumpers of the vehicle.

To help the driver monitor the successful completion of the manoeuvre, the system automatically displays the Visiopark 1 and activates the parking sensors.

Peugeot 2008. Full Park Assist

To initiate parking assistance when approaching a parking area:

Peugeot 2008. Full Park Assist

Peugeot 2008. Full Park Assist Activating the system deactivates Blind Spot Monitoring System.

Sequence

Once the system is activated, the following steps will be performed successively:

Peugeot 2008. Full Park Assist It is possible to deactivate the system at any time until the start of the manoeuvre, by pressing the red arrow in the upper left corner of the screen.

Peugeot 2008. Full Park Assist Full Park Assist is not always able to react automatically and appropriately due to the performance limits inherent to the system.

The manoeuvre remains the responsibility of the driver, who must not leave the driving position and must never try to lock the system control button.

The driver's seat belt must remain fastened during the manoeuvre.

Choice of the type of manoeuvre and search for space

Depending on whether the vehicle has been driven or not since the ignition was switched on, the function proposes the entry to or exit from a parking space on the touch screen.

Peugeot 2008. Full Park Assist Illumination of this lamp confirms activation.

It is possible to change the type of manoeuvre at any time, including during the available space search phase.

Peugeot 2008. Full Park Assist For "parallel" parking, the space must at least equal to the length of your vehicle plus 1  m.

For "bay" parking, the space must at least equal to the width of your vehicle plus 0.70  m.

Preparing for the manoeuvre

Once the vehicle has stopped, an instructions page is displayed on the screen.

Peugeot 2008. Full Park Assist This symbol will be displayed automatically when the instruction has been applied.

When all instructions have been validated, a new screen is displayed, indicating that you can undertake the manoeuvre.

Peugeot 2008. Full Park Assist The button must be held down throughout the manoeuvre.

The start of the manoeuvre is indicated by the display of a screen with the message "Manoeuvre under way", accompanied by an audible signal.

Visiopark 1 and the parking sensors are automatically activated to help you monitor the immediate area around your vehicle during the manoeuvre.

Performing the manoeuvre

As soon as the driver releases the brake pedal, the system automatically takes control of choosing the travel direction, forwards or reverse, acceleration, braking and the steering direction.

The manoeuvring status is indicated by these symbols:

Peugeot 2008. Full Park Assist Manoeuvre in progress.

Peugeot 2008. Full Park Assist Manoeuvre interrupted.

Manoeuvre completed or abandoned (white arrows indicate that the driver must take back control of their vehicle).

The direction of the manoeuvre is indicated by these symbols:

Peugeot 2008. Full Park Assist Forward gear.

Peugeot 2008. Full Park Assist Reverse gear.

The central arrow is green whilst the vehicle is moving, or white to indicate the next manoeuvring direction.

Peugeot 2008. Full Park Assist Throughout the whole manoeuvre, indicated by the green "AUTO" symbol, the driver must hold the selector button down.

Peugeot 2008. Full Park Assist During manoeuvring phases, the steering wheel performs rapid turns: do not hold the steering wheel or put your hands between the spokes of the steering wheel. Watch out for any objects that could interfere with the manoeuvre (loose clothing, scarf, tie, etc.). Risk of injury!

Peugeot 2008. Full Park Assist If the vehicle slows down significantly, the brake lamps may come on.

Pausing/resuming the manoeuvre

The manoeuvre can be interrupted temporarily at any time, either automatically by the system if an obstacle is detected, or by driver action. If the driver notices a hazard, they may also interrupt the manoeuvre permanently.

To suspend the manoeuvre, the driver can:

The vehicle is immediately immobilised if the manoeuvre is suspended.

This is confirmed by the display of this symbol, accompanied by the message "Manoeuvre suspended".

Resuming the manoeuvre after resolving the conditions for suspending it:

Permanent interruption after suspending the manoeuvre:

Abandoning the manoeuvre

The manoeuvre is abandoned in the following situations:

Abandoning the manoeuvre immediately triggers the vehicle’s brakes and automatically deactivates the function.

Peugeot 2008. Full Park Assist This symbol is displayed, accompanied by the message "Manoeuvre abandoned" on the touch screen.

A message prompts the driver to take back control of the vehicle.

Peugeot 2008. Full Park Assist The function is deactivated after a few seconds; this indicator lamp goes off on the instrument panel and the initial display is resumed.

The system automatically engages gearbox mode P after 4 seconds.

End of manoeuvre

The vehicle stops as soon as the manoeuvre is completed.

This symbol is displayed, accompanied by the message "Manoeuvre completed" on the touch screen.

When the function is deactivated, this indicator lamp on the instrument panel goes off and the original display is restored.

The gearbox changes to  P 4  seconds after completion of the manoeuvre.

A message and symbols prompt the driver to take back control of the vehicle.

The gearbox automatically changes to mode P if no action is taken by the driver within 30 secondss.

Operating limits

The system may suggest an inappropriate parking space (parking prohibited, work in progress with damaged road surface, location alongside a ditch, etc.).

Peugeot 2008. Full Park Assist Do not use the function under the following exterior conditions:

Peugeot 2008. Full Park Assist Do not use the function in the presence of one of the following malfunctions:

Peugeot 2008. Full Park Assist Do not use the function if the vehicle has been subject to one of the following modifications:

With sensors not approved for the vehicle.

Malfunctions

Peugeot 2008. Full Park Assist When the function is not activated, the temporary flashing of this warning lamp and an audible signal indicate a Full Park Assist malfunction.

If the malfunction occurs while the system is in use, the warning lamp goes off.

Peugeot 2008. Full Park Assist If a parking sensor malfunction, indicated by one of these warning lamps coming on, occurs during Full Park Assist use, the function is deactivated.

Contact a PEUGEOT dealer or a qualified workshop.

Peugeot 2008. Full Park Assist In the event of a power steering malfunction, this warning lamp is displayed on the instrument panel, accompanied by a message.

You must stop as soon as it is safe to do so.

Contact a PEUGEOT dealer or a qualified workshop.

Park Assist
Refer to the General recommendations on the use of driving and manoeuvring aids. This system provides active parking assistance: it detects a parking space and then steers in the appropriate directi ...

Practical information
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Indicator Components and components location
Components 1. BSD Indicator 2. Side repeater lamp ...

Kia Niro 2017 (DE HEV) Service Manual: Description and operation
Description AVN system The AVN system simplifies system manipulation and by unifying the vehicle information and user information displays, improves information search and operation experience. The system is basically composed of a keyboard for the operation of combined function ...

© 2016-2021 www.kniro.net