Peugeot 2008: Practical information / Energy economy mode

This system manages the duration of use of certain functions, in order to conserve a sufficient level of charge in the battery with the ignition off.

After switching off the engine, you can still use functions such as the audio and telematic system, the wipers and the dipped beam headlamps or courtesy lamps, for a combined duration of approximately 40 minutes.

Selecting the mode

A confirmation message is displayed when energy economy mode is entered, and the active functions are placed on standby.

Peugeot 2008. Energy economy mode If a telephone call is in progress at the time, it will be maintained for around 10 minutes via the audio system’s hands-free system.

Exiting the mode

These functions are automatically reactivated the next time the vehicle is used.

To restore the use of these functions immediately, start the engine and let it run:

Let the engine run for the specified duration to ensure that the battery charge is sufficient.

To recharge the battery, avoid repeatedly or continuously restarting the engine.

Peugeot 2008. Energy economy mode A flat battery prevents the engine from starting.

For more information on the 12  V battery, refer to the corresponding section.

Load reduction mode

This system manages the use of certain functions according to the level of charge remaining in the battery.

When the vehicle is being driven, the load reduction function temporarily deactivates certain functions, such as the air conditioning and the heated rear screen.

The deactivated functions are reactivated automatically as soon as conditions permit.

Very cold climate screen
(Depending on country of sale.) This removable protective screen prevents the accumulation of snow at the radiator cooling fan. It consists of a first element for the upper part of the front grille a ...

Bonnet
Stop & Start Before doing anything under the bonnet, you must switch off the ignition to avoid any risk of injury resulting from an automatic change to START mode. The location of the interi ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Shift Cable Components and components location
Components 1. Shift lever knob & boots 2. Shift lever assembly 3. Shift cable assembly ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Drive Motor Assembly Specification
Specification Item Specification Type PMSM (Interior Permanent Magnet Synchronous Motor) Max. output 32 kW / 1798 - 2500 rpm Max. torque 170 N·m / 0 - 1798 ...

© 2016-2021 www.kniro.net