This head-up 3D digital instrument panel can be customised.
Depending on the display mode selected, certain information is hidden or presented differently.
Example with the "DIALS" display mode:
Charge level indicator (Electric)
Display of speed limit signs
Power indicator (Electric)
Selector position and gear on automatic gearbox (Petrol or Diesel)
Drive selector position (Electric)
Driving mode selected (other than "Normal" mode)
Displays
Some lamps have a fixed location, others can change location.
For certain functions that have indicator lamps for both operation and deactivation, there is only one dedicated location.
Permanent information
In the standard display, the instrument panel shows:
Optional information
Depending on the display mode selected and the active features, additional information may be displayed:
Customising the instrument panel
Depending on version, the appearance of the instrument panel may be customisable (colour and/or display mode).
Display language and
units
These depend on the touch screen settings.
When travelling abroad, the speed must be shown in the official units of the country you are driving in (mph, miles or km/h, km).
As a safety measure, these
adjustments must be carried out with the vehicle stationary.
Choosing the display colour
(With PEUGEOT Connect Nav)
Depending on version, the instrument panel display colour depends on the colour scheme chosen in this system.
Choosing the display mode
In each mode, specific types of information are displayed on the instrument panel.
Changing the display mode
If you do not press the thumbwheel, the selected display mode is automatically applied after a few moments.
Presentation of display modes
Configuring a "PERSONAL" display mode
With PEUGEOT Connect Radio
With PEUGEOT Connect Nav
The information is displayed immediately on the instrument panel if the corresponding display mode is selected.
The
type of information selected in the "PERSONAL 1" mode is not available
in the "PERSONAL 2" mode.
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection
1.
After disconnecting the vapor hose from the PCV valve, remove the PCV
valve.
2.
Reconnect the PCV valve to the vapor hose.
3.
Run the engine at idle, then put a finger over the open end of the PCV
v ...
Kia Niro 2017 (DE HEV) Service Manual: Refrigerant Line Repair procedures
Replacement
1.
Discharge refrigerant from refrigeration system.
2.
Replace faulty tube or hose.
Cap the open fittings immediately to keep moisture o ...