Removal and Installation |
1. |
Remove the cylinder head. (Refer to Cylinder Head Assembly - "Cylinder Head") |
2. |
Remove the water jacket insert (A).
|
3. |
Install in the reverse order of removal. |
Kia Niro 2017 (DE HEV) Service Manual: Fuel Pressure Sensor (FPS) Repair procedures
Inspection
1.
Connect the KDS/GDS on the Data Link Connector (DLC).
2.
Check that the output voltage is within the specification.
Pressure [kPa (kgf/cm², psi)]
Output Voltage (V) [Verf=5V]
...
Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Replacement
Use a plastic panel removal tool to remove interior trim pieces without
marring the surface.
1.
Open the fuel filler door and then filler door cap.
2.
...