Kia Niro: Cooling System / Reservoir Tank Repair procedures

Removal and Installation
1.

Drain the coolant.

(Refer to Cooling System - "Coolant")

2.

Disconnect the radiator reservoir hose (A).

3.

Disconnect the reservoir hose (B).

4.

Remove the reservoir tank (C).

Tightening torque :

7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

5.

Install in the reverse order of removal.

6.

Fill the coolant.

(Refer to Cooling System - "Coolant")

Radiator Repair procedures
Removal and Installation 1. Disconnect the negative battery terminal. 2. Remove the air cleaner. (Refer to Intake and Exhaust System - "A ...

Water pump Repair procedures
Removal    • Be sure to read and follow the “General Safety Information and Caution” ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Front Seat Shield Outer Cover Repair procedures
Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior trim pie ...

Kia Niro 2017 (DE HEV) Service Manual: Special service tools
Special Service Tools Tool Name / Number Illustration Description Crankshaft front oil seal installer A : 09231-G2100 (installer) B : 09231 - H1100 (handle) Used for installing crankshaft fron ...

© 2016-2024 www.kniro.net