Kia Niro: Engine Coolant / Inverter coolant

Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses.

The coolant level should be filled between MAX and MIN marks on the side of the coolant reservoir when the engine is cool.

If the coolant level is low, add enough specified coolant to provide protection against freezing and corrosion. Bring the level to MAX, but do not overfill. If frequent additions are required, we recommend that the system be inspected by an authorized Kia dealer.

Engine coolant
Check the condition and connections of all cooling system hoses and heater hoses. Replace any swollen or deteriorated hoses. The coolant level should be filled between MAX and MIN marks on the si ...

Recommended coolant
When adding coolant, use only deionized water or soft water for your vehicle and never mix hard water in the coolant filled at the factory. An improper coolant mixture can result in serious m ...

Other information:

Toyota Corolla 2019-2022 Owners Manual: Changing engine switch modes
Modes can be changed by pressing the engine switch with brake pedal (continuously variable transmission) or clutch pedal (manual transmission) released. (The mode changes each time the switch is pressed.) 1 OFF* The emergency flashers can be used. 2 ACC Some electrical components such as the audi ...

Kia Niro 2017 (DE HEV) Service Manual: Components and components location
Components 1. Cowl cross bar assembly 2. Main wiring harness 3. Main crash pad assembly 4. Side speaker grille assembly [RH] 5. Steering column shroud lower pannel 6. Center speaker grille assembly 7. Side speaker grille assembly [LH] 8. Cras ...

© 2016-2022 www.kniro.net