Kia Niro: Dual Clutch Transmission Control System / Input Speed Sensor Schematic diagrams

Input Speed Sensor Description and operation

Description • The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM) ...

Input Speed Sensor Repair procedures

Removal 1. Remove the clutch actuator. (Refer to Dual Clutch Transmission Control System - "Clutch Actuator Assembly") 2. Remove ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
General Inspection Before and after servicing the EPS system, perform the troubleshooting and test procedure as follows. Compare the system condition with normal condition in the table below and if abnormal symptom is detected, perform necessary remedy and inspe ...

Kia Niro 2017 (DE HEV) Service Manual: Power Relay Assembly (PRA) Description and operation
Description The Power Relay Assembly (PRA) consists of the positive and negative main relays, pre-charge relay, pre-charge resistor and battery current sensor. It is located inside the battery pack assembly and controls the high voltage power circuit between the high voltage batte ...