Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") |
3. |
Remove the front fog lamp assembly (A) after loosening the mounting screws.
|
Installation |
1. |
Install the front fog lamp assembly. |
2. |
Install the front bumper cover. |
3. |
Connect the negative (-) battery terminal. |
Kia Niro 2017 (DE HEV) Service Manual: Inspection mode procedures
Procedure for entering engine
forced activation mode
If the engine needs to be running constantly while the vehicle is stopped to
inspect emission gas or perform maintenance on the vehicle, follow below procedure
to enter engine forced activation mode.
1.
Place ...
Kia Niro (DE HEV) Owners Manual: Rear window wiper blade
1. Raise the wiper arm and pull out the wiper blade assembly.
2. Install the new blade assembly by inserting the center part into the slot
in the wiper arm until it clicks into place.
3. Make sure the blade assembly is installed firmly by trying to pull it slightly.
To prevent damage to the ...