Kia Niro: Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle

Kia Niro 2017 (DE HEV) Service Manual / Driveshaft and axle / Front Axle Assembly / Front Hub / Knuckle

BJ Boot Repair procedures
Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refe ...

Components and components location
Components 1. Brake disc 2. Hub assembly 3. Dust cover 4. Knuckle ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Starter Generator(HSG) Specification
Specification Item Specification Type PMSM (Interior Permanent Magnet Synchronous Motor) Max. output 8.0 kW / 2,160 - 12,000 rpm Max. torque 35.3 N·m / 0 - 2,160 rpm ...

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV v ...

© 2016-2024 www.kniro.net