Kia Niro: Air Conditioning System / Evaporator Temperature Sensor Description and operation
| Description |
The evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC). Electrical resistivity of NTC increases with decrease in temperature and decreases with increase in temperature.
Evaporator Core Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and blower assembly.
(Refer to Heater - "Heater Unit&qu ...
Evaporator Temperature Sensor Repair procedures
Inspection
1.
Switch "OFF" the ignition.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure ...
Other information:
Toyota Corolla 2019-2022 Owners Manual: Changing engine switch modes
Modes can be changed by pressing the engine switch with brake pedal (continuously
variable transmission) or clutch pedal (manual transmission) released. (The mode
changes each time the switch is pressed.)
1 OFF*
The emergency flashers can be used.
2 ACC
Some electrical components such as the audi ...
Kia Niro 2017 (DE HEV) Service Manual: Hybrid Power Control Unit (HPCU) Schematic diagrams
Hybrid Power Control Unit
(HPCU) connector and high voltage cable
Hybrid Power Control Unit
(HPCU) terminal And Input/Output signal
ECM Terminal Function
Connector [C133-S]
(94Pin) : HPCU signal input and control
Terminal
...
