Kia Niro: ESP(Electronic Stability Program) System / ESP OFF Switch Repair procedures
| Removal |
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery terminal. |
| 2. |
Remove the crash pad lower panel. (Refer to Body -"Crash pad") |
| 3. |
Remove the side crash pad switch assembly.
|
| 4. |
Check the continuity between the switch terminals as the ESP OFF switch is engaged.
|
ESP OFF Switch Description and operation
Description
1.
The ESP OFF switch is for the user to turn off the ESP system.
2.
The ESP OFF lamp is on when ESP OFF switch is engaged.
...
Emergency Signal System Description and operation
Description
Introduction of quick
brake warning system (ESS)
In case of quick brake by driver, the brake lamp or turn signal is blinked to
warn against the vehicle at rear.
...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: BJ Boot Components and components location
Components
1. BJ assembly
2. BJ circlip
3. BJ boot band
4. BJ boot
5. Dynamic damper band
6. Dynamic damper
7. Shaft
8. TJ boot band
9. TJ boot
10. Spider assembly
11. Snap ring
12. TJ housing
13. T ...
Kia Niro 2017 (DE HEV) Service Manual: Front Driveshaft Repair procedures
Removal
1.
Remove the wheel and tire.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
Be care ...
