Storing driver’s seat positions
1. Shift the shift lever into P while the engine start/stop button is ON or ignition switch ON.
2. Adjust the driver’s seat and outside rearview mirror comfortable for the driver.
3. Press SET button on the control panel. The system will beep once.
4. Press one of the memory buttons (1 or 2) within 4 seconds after pressing the SET button. The system will beep twice when memory has been successfully stored.
Recalling positions from memory
1. Shift the shift lever into P while the engine start/stop button is ON or ignition switch ON.
2. To recall the position in the memory, press the desired memory button (1 or 2). The system will beep once, then the driver’s seat will automatically adjust to the stored position.
Adjusting the control switch for the driver’s seat while the system is recalling the stored position will cause the movement to stop and move in the direction that the control switch is moved.
WARNING
Use caution when recalling the adjustment memory while sitting in the vehicle. Push the seat position control switch to the desired position immediately if the seat moves too far in any direction.
Kia Niro (DE HEV) Owners Manual: Interior light
When the interior light switch is in the DOOR position and all doors (and tailgate)
are locked and closed, the room lamp will come on for 30 seconds if any of the below
is performed.
Without smart key system
- When the door unlock button is pressed on the transmitter.
With the smart key ...
Kia Niro 2017 (DE HEV) Service Manual: Resolver Sensor Repair procedures
Inspection
Hybrid Drive Motor
1.
Inspect the resolver sensor resistance.
Item
Pin
Specification
Remarks
Resistance
(Resolver sensor)
1 - 5 ...