Kia Niro: Seats / Driver position memory system

A driver position memory system is provided to store and recall the driver seat and outside rearview mirror position with a simple button operation. By saving the desired position into the system memory, different drivers can reposition the driver seat based upon their driving preference.

If the battery is disconnected, the position memory will be erased and the driving position should be restored in the system.

WARNING

Never attempt to operate the driver position memory system while the vehicle is moving.

This could result in loss of control, and an accident causing death, serious injury, or property damage.

Seatback pocket
The seatback pocket is provided on the back of the front passenger’s and driver’s seatbacks. WARNING - Seatback pockets Do not put heavy or sharp objects in the seatback pockets. In an accid ...

Storing positions into memory using the buttons on the door
Storing driver’s seat positions 1. Shift the shift lever into P while the engine start/stop button is ON or ignition switch ON. 2. Adjust the driver’s seat and outside rearview mirror comforta ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end of the PCV v ...

Kia Niro 2017 (DE HEV) Service Manual: Dual Clutch Assembly Repair procedures
Removal 1. Remove the hybrid drive motor & dual clutch transmission assembly from the vehicle. (Refer to DCT System - "DCT") 2. Remove the hybrid drive motor assembly from the DCT assembly. (Refer to Hybrid Motor System ...

© 2016-2020 www.kniro.net