Kia Niro: Starting the hybrid vehicle (Smart key) / Starting the Hybrid System
1.Carry the smart key into the vehicle.
2.Make sure the parking brake is firmly applied.
3.Place the shift lever in the P(Park) position.
In N (neutral) position, you can not start the vehicle.
4.Depress the brake pedal.
5.Press the engine start/stop button or turn the ignition switch to the ON position.
6.The engine should be started without pressing the accelerator. In extremely cold weather or after the vehicle has not been operated for several days, let the engine warm up without depressing the accelerator.
- Even if the smart key is in the vehicle, if it is far away from you, the engine may not start.
- When the engine start/stop button is in the ACC or ON position or turn the ignition switch to the ACC or ON position. If any door is open, the system checks for the smart key. If the smart key is not in the vehicle, the warning, "Key is not in vehicle" will come on, and if all doors are closed, the chime will also sound for about 5 seconds. The indicator will turn off while the vehicle is moving. Keep the smart key in the vehicle when using the ACC position or if the vehicle engine is on.
If the starting procedure is followed, the "READY" symbol on the instrument cluster will turn on. For more details, Please check chapter 6.
ECONOMICAL and SAFE OPERATION of Hybrid system
Drive smoothly. Accelerate at a moderate rate and maintain a steady cruising
speed. Don't make "jackrabbit" starts. Don't race between stoplights. Avoid
heavy traffic whenev ...
Other information:
Kia Niro (DE HEV) Owners Manual: Driving on grades
Reduce speed and shift to a lower gear before you start down a long or steep
downgrade. If you don’t shift down, you might have to use your brakes so much that
they would get hot and no longer operate efficiently.
On a long uphill grade, shift down and reduce your speed to around 70 km/h (45 ...
Kia Niro (DE HEV) Owners Manual: Non-operational conditions of parking assist system
Parking assist system may not operate normally when:
1. Moisture is frozen to the sensor. (It will operate normally when moisture
melts.)
2. Sensor is covered with foreign matter, such as snow or water, or the sensor
cover is blocked. (It will operate normally when the material is removed or t ...