Kia Niro: Rear Wiper/Washer / Rear Washer Motor Repair procedures

Inspection
1.

With the washer motor connected to the reservoir tank, fill the reservoir tank with water.

  

Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter.

2.

Remove the engine room under cover.

(Refer to Engine Mechanical System - "Engine Room Under Cover")

3.

Remove the front wheel guard [RH].

(Refer to Body - "Front Wheel Guard")

4.

Connect positive (+) battery cables to terminal 3 and negative (-) battery cables to terminal 2 respectively.

5.

Check that the motor operates normally and the washer motor runs and water sprays from the front nozzles.

6.

If they are abnormal, replace the washer motor.

[Front & Rear washer]

No.
Description
1
Front windshield washer (+)
2
Ground
3
Rear washer (+)

Rear Washer Switch Repair procedures
Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. [Left Handle Drive] ...

Seat Electrical
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: SRS Control Module (SRSCM) Description and operation
Description The primary purpose of the SRSCM (Supplemental Restraints System Control Module) is to determine between an event that warrants restraint system deployment and an event that does not. The SRSCM must decide whether to deploy the restraint system or not. After determinin ...

Kia Niro (DE HEV) Owners Manual: Auto defogging system
Auto defogging reduces the possibility of fogging up the inside of the windshield by automatically sensing the moisture of inside the windshield. This indicator illuminates when the auto defogging system senses the moisture of inside the windshield and operates. If more moisture is in the ve ...

© 2016-2020 www.kniro.net