Specification |
Air Conditioner
Item |
Specification |
|
Compressor |
Type |
HES27 (Electric Scroll) |
Communication type |
CAN communication |
|
Oil type & Capacity |
POE Oil, 130 ± 10cc (4.58 ± 0.35oz.) |
|
Motor type |
BLDC |
|
Rated voltage |
270V |
|
Operation voltage |
190 - 320V |
|
Expansion valve |
Type |
Block type |
Refrigerant |
Type |
R-134a, R-1234yf |
Capacity |
550 ± 25 g (19.4 ± 0.88 oz.) |
Blower Unit
Item |
Specification |
|
Fresh and recirculation |
Operating method |
Actuator |
Blower |
Type |
Sirocco pan |
Speed step |
Auto + 8 speed (Automatic) |
|
Speed control |
PWM blower module (Auto) |
|
Air filter |
Type |
Particle filter |
Heater and Evaporator Unit
Item |
Specification |
||
Heater |
Type |
Pin & tube type |
|
Heating capacity |
4,560 - 4,800 kcal/hr (5.3 - 5.58 kw) |
||
Mode operating method |
Actuator |
||
Temperature operating method |
Actuator |
||
Evaporator |
Temperature control type |
Evaporator temperature sensor |
|
A/C ON/OFF [°C(°F)] |
Blower 1 - 4 speed |
ON: 3.0 ± 0.5°C(37.4 ± 0.9°F), OFF: 1.5 ± 0.5°C(34.7 ± 0.9°F) |
|
Blower 5 - 6 speed |
ON: 2.5 ± 0.5°C(36.5 ± 0.9°F), OFF: 1.0 ± 0.5°C(33.8 ± 0.9°F) |
||
Blower 7 - 8 speed |
ON: 2.1 ± 0.5°C(35.8 ± 0.9°F), OFF: 0.6 ± 0.5°C(33.1 ± 0.9°F) |
Tightening Torques |
Items |
N·m |
kgf·m |
lb·ft |
Compressor - Mounting bolts |
20.0 - 32.95 |
2.04 - 3.36 |
14.75 - 24.30 |
Compressor - Bracket bolts |
21.6 - 32.4 |
2.2 - 3.3 |
6.5 - 10.1 |
Condenser - Discharge hose |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
Condenser - Liquid tube |
|||
Compressor - Discharge hose |
7.8 - 11.8 |
0.8 - 1.2 |
6.5 - 10.1 |
Compressor - Suction hose |
|||
Expansion valve - Evaporator |
7.8 - 11.8 |
0.8 - 1.2 |
6.5 - 10.1 |
Kia Niro 2017 (DE HEV) Service Manual: Blind Spot Detection Radar Calibration Description and operation
Description
To correctly sense vehicles on the neighboring lanes using the radar, the direction
of the sensor and the direction of the vehicle must be aligned.
This is the BSD unit alignment. If this alignment is not performed as in illustration
below, it may cause degradation of ...
Kia Niro (DE HEV) Owners Manual: Headlamp (High/Low beam) bulb replacement
1. Open the hood.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connector.
4. Remove the bulb-socket from the headlamp assembly by turning the bulb-socket
counterclockwise until the tabs on the bulb-socket align with the slots on the ...