Kia Niro: Body Side Molding / Side Sill Molding Repair procedures

Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Be careful not to bend or scratch the trim and panels.

1.

Loosen the side sill molding mounting screws.

2.

Using a remover, remove the side sill molding (A).

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Waist Line Molding Repair procedures
Replacement    Put on gloves to protect your hands.    ...

Cowl Top Cover
...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Brake/Clutch Fluid Repair procedures
Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification. Check the brake system for any leakage if th ...

Kia Niro 2017 (DE HEV) Service Manual: Safety Plug Description and operation
Description Safety Plug is installed on the rear side of the high voltage battery and it can mechanically shut the high voltage circuit off when servicing the high voltage system (i.e. High Voltage Battery, Power Relay Assembly, HPCU, BMS ECU, Hybrid Drive Motor, Inverter, HSG, LD ...

© 2016-2020 www.kniro.net