Kia Niro: Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Kia Niro 2017 (DE HEV) Service Manual / Engine Control/Fuel System / Engine Control System / Intake Air Temperature Sensor (IATS) Description and operation

Description

Mounted inside the Manifold Absolute Pressure Sensor, Intake Air Temperature Sensor (IATS) detects the intake air temperature.

To precisely calculate the amount of air, correction of the air temperature is required as the air density varies with the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) thermistor with resistance in reverse proportion to the temperature.

Intake Air Temperature Sensor (IATS) Specifications
Specification Temperature Resistance (kΩ) °C °F -40 -40 40.93 - 48.35 ...

Intake Air Temperature Sensor (IATS) Schematic diagrams
Circuit Diagram Harness Connector ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Tire (pressure & tread wear) Repair procedures
Inspection 1. Check the tire pressure. 16(inch) : 230 kPa (33 psi) 18(inch) : 230 kPa (33 psi) Tire Rotation Checking For Pull And Wander If the steering pulls to one side, rotate the tires according to the following wheel rotation procedure. ...

Kia Niro (DE HEV) Owners Manual: Operation of the rear parking assist system
Operating condition This system will activate when the indicator on the rear parking assist OFF button is not illuminated. If you desire to deactivate the rear parking assist system, press the rear parking assist OFF button again. (The indicator on the button will illuminate.) To turn t ...

© 2016-2019 www.kniro.net