Kia Niro: Blower / Intake Actuator Description and operation

Description

Located in the blower unit, the intake actuator regulates the intake door based on the signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.

Intake Actuator Components and components location
Components Location 1. Intake actuator ...

Intake Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the intake actuator connector. 3. Verify that the intak ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the specific ...

Kia Niro 2017 (DE HEV) Service Manual: Hybrid Drive Motor Assembly Components and components location
Components 1. Dual clutch transmission assembly (DCT) 2. Hybrid drive motor assembly 3. Concentric slave cylinder 4. Engine clutch actuactor assembly ...

© 2016-2019 www.kniro.net