Kia Niro: Hybrid Control System / Hybrid Power Control Unit (HPCU) Specifications

Kia Niro 2017 (DE HEV) Service Manual / Hybrid Control System / Hybrid Control System / Hybrid Power Control Unit (HPCU) Specifications

Specification

Hybrid Power Control Unit (HPCU)

Item
Specification
Operating Voltage (V)
204 - 275.2
Operating Frequency (Hz)
Max. 826
LDC Output Voltage (V) [Auxiliary 12V Battery]
12.8 - 15.1
LDC Rated Power (kW)
1.8
Cooling Method
Water-cooled

Description and operation
Description The HCU (Hybrid Control Unit) controls the overall hybrid systems and is connected with each of the control modules (ECM, TCM, MCU, BMS, ECU, etc.) via CAN. The hybrid sys ...

Hybrid Power Control Unit (HPCU) Components and components location
Components 1. Hybrid Control Unit(HCU) [HPCU] 2. Inverter [HPCU] 3. Low Voltage DC/DC Converter (LDC) [HPCU] 4. High voltage connector (↔ High voltage batte ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the PCSV connector. 3. Measure resistance between the PCSV terminals 1 and 2. 4. Check that the resistance is within the specific ...

Kia Niro 2017 (DE HEV) Service Manual: Stop Lamp Switch Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") 3. Remove the knee air bag. (Refer to Restrain ...

© 2016-2021 www.kniro.net