Kia Niro: Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Kia Niro 2017 (DE HEV) Service Manual / Hybrid Control System / Hybrid Control System / Hybrid Power Control Unit (HPCU) Components and components location

Components

1. Hybrid Control Unit(HCU) [HPCU]
2. Inverter [HPCU]
3. Low Voltage DC/DC Converter (LDC) [HPCU]
4. High voltage connector (↔ High voltage battery system assembly)
5. High voltage connector (↔ Hybrid drive motor assembly)
6. High voltage connector (↔ HSG&Electric A/C compressor)
7. Low Voltage DC/DC Converter (LDC) supply output terminal (+)
8. DC Fuse (30A)
9. Low Voltage DC/DC Converter (LDC) ground terminal (-)
10. High voltage connector (↔ HSG&Electric A/C compressor)

Hybrid Power Control Unit (HPCU) Specifications
Specification Hybrid Power Control Unit (HPCU) Item Specification Operating Voltage (V) 204 - 275.2 Operating F ...

Hybrid Power Control Unit (HPCU) Description and operation
Description The Hybrid Power Control Unit (HPCU) is an integrated power conversion unit which consists of the two inverters, LDC, and HCU. ...

Other information:

Kia Niro 2017 (DE HEV) Service Manual: Auto Defogging Actuator Repair procedures
Inspection 1. Switch "OFF" the ignition. 2. Disconnect the auto defogging sensor connector. 3. Connect the power (+) terminal to mode actuator connector terminal 3, and ground the negative (-) terminal to t ...

Kia Niro 2017 (DE HEV) Service Manual: Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 9.81 - 14.71 N·m (1.0 - 1.5 kgf·m, 7.2 - 10.8 lb·ft) ...

© 2016-2018 www.kniro.net