Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the glove box housing. (Refer to Body - "Glove Box Housing") |
3. |
Disconnect the VESS unit connector (A).
|
4. |
Remove the VESS unit (A) after loosening the mounting nuts.
|
Installation |
1. |
Install the VESS unit and connecting the connector. |
2. |
Install the glove box housing. |
3. |
Connect the negative (-) battery terminal. |
Kia Niro 2017 (DE HEV) Service Manual: Mass Air Flow Sensor (MAFS) Description and operation
Description
MAFS uses a sensing element made of a hot-film to measure the mass of intake
air entering the engine and to send the signal to the ECM.
A large amount of intake air represents acceleration or high load conditions
while a small amount of intake air represents decelerati ...
Kia Niro 2017 (DE HEV) Service Manual: Front Wheel Speed Sensor Repair procedures
Removal
1.
Remove the tire.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
Be careful not to ...