Kia Niro: Virtual Engine Sound System (VESS) / Virtual Engine Sound Speaker Repair procedures

Removal
1.

Disconnect the negative(-) battery terminal.

2.

Remove the front bumper cover.

(Refer to Body - "Front Bumper Cover")

3.

Remove the high pitch horn and low pitch horn.

(Refer to Body Electrical System - "Horn")

4.

Disconnect the VESS speaker connector (A).

5.

Remove the VESS speaker (A) after loosening the mounting bolts.

Installation
1.

After connecting the VESS connectors, install the VESS speaker.

2.

After connecting the horn connectors, install both high pitch and low pitch horns.

3.

Install the front bumper cover.

4.

Connect the negative (-) battery terminal.

Virtual Engine Sound Speaker Components and components location
Component Location ...

Windshield Wiper/Washer
...

Other information:

Toyota Corolla 2019-2022 Owners Manual: Adjusting the set speed
To change the set speed, press the “+RES” or “-SET” switch until the desired set speed is displayed. 1 Increases the speed (Except when the vehicle has been stopped by system control in vehicle-to-vehicle distance control mode) 2 Decreases the speed Fine adjustment: Press the switch. Larg ...

Toyota Corolla 2019-2022 Owners Manual: Cargo and luggage
Take notice of the following information about storage precautions, cargo capacity and load: Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) — (Total weight of occupants) Steps for Determining Correct Load Limit — ( ...

© 2016-2022 www.kniro.net