Kia Niro: Lighting System / Vanity Lamp Repair procedures
| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Detach the vanity lamp (A) using a flat-tip screwdriver.
|
| 3. |
Disconnect the vanity lamp connector (A).
|
Bulb Replacement
| 1. |
Detach the vanity lamp (A) using a flat-tip screwdriver.
|
| 2. |
Remove the vanity lamp bulb (A).
|
| Installation |
| 1. |
Connect the vanity lamp connector. |
| 2. |
Install the vanity lamp. |
| 3. |
Connect the negative (-) battery terminal. |
Room Lamp Repair procedures
Removal
•
Put on gloves to prevent hand injuries.
•
...
Overhead Console Lamp Repair procedures
Inspection
1.
Remove the overhead console lamp assembly then check for continuity between
terminals. If the continuity is not as specified, replace the map lamp switch. ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Clutch Cover And Disc Repair procedures
Removal
1.
Remove the hybrid motor assembly.
(Refer to Hybrid Motor System - "Hybrid Motor Assembly")
2.
Remove the clutch cover assembly and clutch disc after loosening the
bolts.
...
Kia Niro 2017 (DE HEV) Service Manual: AVN Remote Controller Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering wheel assembly.
(Refer to Steering System - "Steering Wheel")
3.
Remove the steering back cover (A) after loosening the mounti ...
