Kia Niro: Lighting / Turn signals and lane change signals
The ignition switch must be on for the turn signals to function. To turn on the turn signals, move the lever up or down (A). The green arrow indicators on the instrument panel indicate which turn signal is operating.
They will self-cancel after a turn is completed. If the indicator continues to flash after a turn, manually return the lever to the OFF position.
To signal a lane change, move the turn signal lever slightly and hold it in position (B). The lever will return to the OFF position when released.
If an indicator stays on and does not flash or if it flashes abnormally, one of the turn signal bulbs may be burned out and will require replacement.
High beam operation
To turn on the high beam headlamp, push the lever away from you. The lever will
return to its original position.
The high beam indicator will light when the headlight high beams are switched
on ...
One-touch lane change function
To activate an one-touch lane change function, move the turn signal lever slightly
for less than 0.7 second and then release it. The lane change signals will blink
3 times.
✽ NOTICE
If an indi ...
Other information:
Kia Niro 2017 (DE HEV) Service Manual: Rheostat Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the crash pad plate [LH] (A) after loosening the screws.
...
Kia Niro 2017 (DE HEV) Service Manual: Front Seat Shield Inner Cover Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remove interior trim pie ...
